Nortec Silage Facer Contact Information:
USA and Canada 715-623-6300 Export 715-623-3754
email: nortecusa@hotmail.com
USA and Canada 715-623-6300 Export 715-623-3754
email: nortecusa@hotmail.com
A1 Why a Silage Facer?
The dairy industry is currently using considerable resources to improve herd productivity, especially through feed management. The silage facer is a tool that has shown tremendous potential in efforts to improve feed quality.
The conventional method of removing feed with a bucket is very hard on equipment and results in significant feed quality reduction by introducing oxygen into the face of the pile. The NORTEC Facer quickly shaves feed from the face of the pile each day. The result is consistent high-quality feed that is easy to load and mix uniformly.
The conventional method of removing feed with a bucket is very hard on equipment and results in significant feed quality reduction by introducing oxygen into the face of the pile. The NORTEC Facer quickly shaves feed from the face of the pile each day. The result is consistent high-quality feed that is easy to load and mix uniformly.
A2 Bunker / Feed Management
Spoilage and waste have traditionally been part of the management game for bunker silos. One contributing factor: Using a loader to remove feed from the silo often leaves a ragged face where oxygen can work its way into the silage and set the spoilage process in motion.
B1 Nortec Silage Facer Specifications
C1 You Tube / Nortec usa
Nortecusa subscribed to a You Tube channel Go To: You Tube, Type in nortecusa
Featured Videos
Nortec Silage Facer Challenger & Avenger Series
Nortec Silage Facer Ultra FAD Silage Facer
OR Clip on the below image to START video
Featured Videos
Nortec Silage Facer Challenger & Avenger Series
Nortec Silage Facer Ultra FAD Silage Facer
OR Clip on the below image to START video
D1 Nortec Silage Facer Literature
Literature: Ultra FAS Single Drive & FAD Dual Drive and Feature Sheet
Click on Picture to View and Print Tip & Trick: To print. Click Print. If printing does not occur save file as... Then Print off Desktop
Literature Click on Button To View Literature
E1 $ and Order Codes Click to enlarge and print
F1 Nortec Ultra Picture File:
F2 Pictures: Action: Silage Bunker
F3 Pictures: Wheel Loaders
Nortec Ultra Series Silage Facer: FAD Series: Wheel Loaders - Telehandlers
F3A Pictures: Wheel Loader Mounts
F3B Pictures: Wheel Loader Boom
G Skid Steer Pictures
G1 FAS Series for Skid Steers
G1 Pictures: Skid Steer Booms
H Pictures Telehandlers
I Boom Reach
J Attacker Rotor
K End Cutters: Single and Triple
L Hydraulic Motors
M Cushion Valve for V-Tec 3 & Power TEC Hydraulic Motors
N Relief Valve - Soft Start
O Chain Drive vs Direct Drive
P Chain Case
Q Special Applications
R Specifications: Power Units: Skid Steers, Telehandlers, Wheel Loaders
S Hose Kits
What To Look For In Purchasing A Silage Facer
Rotor Power Silage Facer
The NORTEC Facer is ruggedly constructed, using highly specialized rotor technology.
W Safety
Please Click Below On You Tube Video To View
NON-Current Models:
Models... Challenger, Avenger S-Series, Avenger T-Series
Challenger Silage Facer Skid Steer 65hp and under
It's a challenge in today's business to lower costs and improve efficiency to keep on top of your feed management program. It's all a challenge! Introducing the NEW NORTEC Challenger 05-Series Silage Facer. The Challenger is an extension of the NORTEC Silage Facer line. Don’t need all the performance-packed features of the Avenger Facer? Take a look at the Challenger! The FA605D is offered in a 6' (182.88 cm) cutting width, 84" (213.86kg) reach boom, and direct drive hydraulics.
Avenger Series of Nortec Silage Facers S-Series & T-Series
Avenger S-Series Silage Facer Skid Steers 65hp and over
Single Drive
FA610S2 - 6' Skid Steer
FA710S2 - 7' Skid Steer
FA810S2 - 8' Skid Steer
FA610S2 - 6' Skid Steer
FA710S2 - 7' Skid Steer
FA810S2 - 8' Skid Steer
Avenger S-Series Telehandler
Single Drive
FA610S2 - 6' Telehandler
FA710S2 - 7' Telehandler
FA810S2 - 8' Telehandler
FA610S2 - 6' Telehandler
FA710S2 - 7' Telehandler
FA810S2 - 8' Telehandler
Avenger T-Series Wheel Loader
Twin Drive
FA810T2 - 8' Industrial Wheel Loader
FA1010T2 - 10' Industrial Wheel Loader
FA1210T2 - 12' Industrial Wheel Loader
FA810T2 - 8' Industrial Wheel Loader
FA1010T2 - 10' Industrial Wheel Loader
FA1210T2 - 12' Industrial Wheel Loader
NORTEC EXCLUSIVE
Processing Head + Boom + Mounting = Silage Facer
Click on Picture to Enlarge
End Cutter Standard Equipment
Nortec Bale Buster
Bale Buster- If you have the need to process large bales, the NORTEC Avenger facer will shred large bales in seconds, making it easier for the TMR to process. Need straw bales broken up? Breaking up straw bales not only saves time, it also doubles bale coverage.
Nortecusa subscribed to a You Tube channel Go To: You Tube, Type in nortecusa
Featured Videos
Nortec Silage Facer Bale Buster Application
OR Clip on the below image to start video
Featured Videos
Nortec Silage Facer Bale Buster Application
OR Clip on the below image to start video
You Tube Video: Nortec Avenger For Skid Steers 140626
Dieci Telehandlers
Nortec Silage Facer for Manitou Telehandlers
Turn your Manitou into a Silage Facer Processor. Remove silage quick and easy.
You Tube Manitou Nortec Silage Facer Video
Nortecusa subscribed to a You Tube channel Go To: You Tube, Type in nortecusa
Featured Videos
Manitou With Nortec Silage Facer
OR Clip on the below image to start video
Featured Videos
Manitou With Nortec Silage Facer
OR Clip on the below image to start video
Other Nortec Silage Facers on Telehandlers
Pictures And Video of Nortec Silage Facer on Skid Steers Section
Pictures and Video of Nortec Silage Facer on Wheel Loaders Section
