There's a NEW kid on the block!
EXCLUSIVE: Flip-Up Gauge Wheels
ProSWEEP Technology
Best in Class Hood Design & Sweeping Action
ProSWEEP Technology
Best in Class Hood Design & Sweeping Action
The Clean Sweep rotary broom all started with a clean sheet of paper. Why are all rotary brooms designed and built the same? Nortec engineers are thinking outside the box. Performance, strength, ease of operation, dust control, and broom design/options. Dust suppression is not an after thought, it's a design criteria. NORTEC takes dust control seriously and is doing something about it with forethought, like front-mounted gauge wheels. In the future, this industry-changing feature will not be an option, it will be standard. If you're looking for power, here it is. PowerTEC wheel motor, broom-drive system. The motor and frame are matched as a working system. The ZD motor has the power and performance you're looking for and the reliability you demand.
What is a Rotary Broom:
A rotary is a method of mechanically moving material. A circleular broom is mounting in frame work and power by some source of exterior power. As the broom rotates it will fling or move the material forward. Nortec Clean Sweep Broom is designed for the sweeping and removal of snow, leaves, dirt, light gravel, and other materials from parking lots, sidewalks, and other surfaces. Heavy duty nylon bristles make short work of any clean up job without damaging the surface below.
What is a Rotary Broom Used For:
It’s a dirty world out there. Cleaning is a time comcumming job. This is a labor intensive, back breaking job. Theirs got to be a better way of sweeping and moving material. This is where the rotary broom was invented. In most cases material will dry and turn hard and crusty. You need a broom that will sweep, cut and move the material.
Industry Leading Features:
Gauge Wheels:
Flip-up gauge wheels. This option saves on brush wear, increases sweep speed,
increases productivity, increases performance and ease of operation.
Gauge wheel mounting/brackets are standard equipment. Caster wheels have built in adjustments; it's as simple as removing spacers and repositioning and you're ready to go. (No Tools Needed)
increases productivity, increases performance and ease of operation.
Gauge wheel mounting/brackets are standard equipment. Caster wheels have built in adjustments; it's as simple as removing spacers and repositioning and you're ready to go. (No Tools Needed)
What Happens If I Don't Have Gauge Wheels?
1) Improper - Broom Wear
2) Increase operator knowlodge
3) Poor Sweeping Performance
2) Increase operator knowlodge
3) Poor Sweeping Performance
Angle
30-Degree Sweep Angle:
De-pin and swing. Keep it simple. 3-position swing (left, right and straight)
SweepTEC Mounting System:
Pull and Swing - Just remove the king pin and angle arm and you're ready to switch to a different mounting system.
De-pin and swing. Keep it simple. 3-position swing (left, right and straight)
SweepTEC Mounting System:
Pull and Swing - Just remove the king pin and angle arm and you're ready to switch to a different mounting system.
SweepTEC Direct Drive Hydraulic PowerTEC ZD Motor:
SweepTEC Direct Drive Hydraulic PowerTEC ZD Motor:
Powerful, compact, durable. This is not your average hydraulic motor!
This motor is used in the industry for wheel drives on power units.
PowerTEC Frame:
This computer/CAD designed frame is engineered for h.p. and torque. This high hp rated frame can handle the power needed for the SweepTEC hydraulic motor.
Powerful, compact, durable. This is not your average hydraulic motor!
This motor is used in the industry for wheel drives on power units.
PowerTEC Frame:
This computer/CAD designed frame is engineered for h.p. and torque. This high hp rated frame can handle the power needed for the SweepTEC hydraulic motor.
SweepTEC - PowerTEC Frame:
PowerTEC Frame:
This computer/CAD designed frame is engineered for h.p. and torque. This high hp rated frame can handle the power needed for the SweepTEC hydraulic motor.
This computer/CAD designed frame is engineered for h.p. and torque. This high hp rated frame can handle the power needed for the SweepTEC hydraulic motor.
Dust Control: Water Tank and Sprayer
Dust Control:
It’s a fact! Sweeping is a dirty job. NORTEC engineers went to work solving the
problem. Adding water is great for dust control. The water tank, sprayer, spray boom is not an after-thought, it's designed into the sweeper. But the design does NOT stop there. Clean Sweep also offers a rear spray boom for even more dust control. May also be used for winter ice control by adding liquid ice melt. By reducing and compacting dust partials, airborne partical contamination is controlled. Install SweepTEC seal-up curtains on the bottom frame and you take dust control to the next level.
Ask about SweepTEC Liquid Dust Bonding Agent
It’s a fact! Sweeping is a dirty job. NORTEC engineers went to work solving the
problem. Adding water is great for dust control. The water tank, sprayer, spray boom is not an after-thought, it's designed into the sweeper. But the design does NOT stop there. Clean Sweep also offers a rear spray boom for even more dust control. May also be used for winter ice control by adding liquid ice melt. By reducing and compacting dust partials, airborne partical contamination is controlled. Install SweepTEC seal-up curtains on the bottom frame and you take dust control to the next level.
Ask about SweepTEC Liquid Dust Bonding Agent
What's the differance in water tank design?
At NORTEC the water tank, sprayer, spray boom is not an after-thought, it's designed into the sweeper. More water capacity, clean hose placement, low center of gravity.
The Broom, where the work gets done.
Rotary brushes or cylinder brushes are manufactured using a poly construction. The coiled brushes are ideal for applications that require constant brush contact and pressure, where ideal for applications requiring more versatility in design and shape.
NORTEC offers 2-Styles of sweeping brush's.
EXCLUSIVE.. Tube Broom Design Industry Standard Wafer Style
NORTEC offers 2-Styles of sweeping brush's.
EXCLUSIVE.. Tube Broom Design Industry Standard Wafer Style
Get your sweeping jobs done right the first time, every time, when you install quality-built poly wafers, low cost option & industry standard on your sweeper.
- Long lasting durability means more hours between broom changeovers
- Great for sweeping asphalt, gravel, mill grind, clay, mud and other types of road debris
NORTEC EXCLUSIVE: Tube Broom
The all-time sweeping classic for street sweeping brush applications.
- Better flick action for thorough debris collection
- Made with virgin polypropylene filament
- More sweeping ends per square inch of broom face
- Tight and consistent broom wraps for impressive sweeping results
Tube Broom - Clean SweepSweepTEC Broom Technology
Clean SweepSweepTEC Broom Technology:
Tube Broom
Choose the standard conventional brush or the ProSWEEP rotor. ProSWEEP offers tightly wound/woven bristles - A huge decrease in brush wear and unheard of sweeping performance. A tight bristle assembly cuts down on material flowing through the wafer.
Tube Broom
Choose the standard conventional brush or the ProSWEEP rotor. ProSWEEP offers tightly wound/woven bristles - A huge decrease in brush wear and unheard of sweeping performance. A tight bristle assembly cuts down on material flowing through the wafer.
What's the Problem:
The problem is flat spots on the broom brushes caused by improper storage.
NORTEC engineers have solved the problem by designing storage stands into
the sweeper. Storage brackets are standard equipment; stands are optional.
By leaving the front gauge wheels down and dropping down the rear legs on the broom, the bristles are suspended off the ground.
NORTEC engineers have solved the problem by designing storage stands into
the sweeper. Storage brackets are standard equipment; stands are optional.
By leaving the front gauge wheels down and dropping down the rear legs on the broom, the bristles are suspended off the ground.
